Dana 44 manual hub removal

 · Re: Fdana 44 hubs. F BRONCO W/MANUAL HUBS. Removal Disassembly. all data pro instructions for an 80, oldest i can look up. Remove cap assembly capscrews and the cap assembly, Fig. 5. Remove snap ring from end of axle shaft. Remove lock ring from wheel hub groove. To remove axle shafts from an axle follow the sequence below: • Jack up the wheel and remove the hub cap. • Remove the axle shaft nut. • Use a puller (Tool C, Fig. ), to remove the wheel hub. • Remove the screws attaching the brake dust shield, grease and bearing retainers, and brake assembly. Remove the shield and retainer. Step by step pictures and tips for assembling your Dana 44 locking hubs. Spindle with outer bearing in place - just to see what it looks like. To actually put the hub together you need to start with the hub body on the spindle. The first thing to go on after the bearing is the inner spindle nut. It has the small stud on it that locks to the.

Using appropriate size (I have seen two different sizes) allen socket/wrench, remove six allen head bolts that hold hub in. Use rubber mallet to lightly tap hub on top until it comes off. Remove the six fasteners from the wheel lock. Now remove the lock out assembly. 2. Remove the six bolts from the caliper assembly. Remove the caliper. 3. Use a breaker bar and socket to loosen then remove the spindle nut. 4. Support the hub assembly before you remove the hub from the spindle. Remove hub assembly. 5. Once the outer portion of the hub is removed (actuating knob and gear hub housing), you're left with the inner clutch gear and it's bushing. Sometimes the bushing is tight into the body of the gear hub housing (big black part of the hub), then you have to remove the chrome ring and clutch gear from the hub housing and remove the snap ring (next photo) from the stub shaft.

NOTE: Use small pick to remove locking key from wheel retainer. DANA 44 AXLE. DANA 50 AXLE. DANA 60 AXLE. 4 may Keep this item in your toolbox at all times! lt is necessary for front bearing, brake or inner axle shaft work. Remove vehicle's existing hub assembly (dust cap, axle snap ring, lock ring, drive flange, spring and oil slinger ring). 2. Set aside removed components.